DC Electric Power

The electric power in watts associated with a complete electric circuit or a circuit component represents the rate at which energy is converted from the electrical energy of the moving charges to some other form, e.g., heat, mechanical energy, or energy stored in electric fields or magnetic fields. For a resistor in a DC Circuit the power is given by the product of applied voltage and the electric current:

watts = volts x amperes

Enter data in any two of the boxes, then click on the active text for the quantity you wish to calculate.

在任意两个框中输入数据，然后点击您希望计算的量的活动文本。

The details of the units are as follows:

单位的细节如下：

Power Dissipated in Resistor

Convenient expressions for the power dissipated in a resistor can be obtained by the use of Ohm's Law.

These relationships are valid for AC applications also if the voltages and currents are rms or effective values. The resistor is a special case, and the AC power expression for the general case includes another term called the power factor which accounts for phase differences between the voltage and current.

The fact that the power dissipated in a given resistance depends upon the square of the current dictates that for high power applications you should minimize the current. This is the rationale for transforming up to very high voltages for cross-country electric power distribution.

DC Power in Series and Parallel Circuits

The power relationship is one of the main tools for the analysis of electric circuits, along with Ohm's Law, the voltage law and the current law. Applying the current law to the above circuits along with Ohm's law and the rules for combining resistors gives the numbers shown below. The determining of the voltages and currents associated with a particular circuit along with the power allows you to completely describe the electrical state of a direct current circuit.